Trusted and true, our original Wireless Pet Containment System keeps pets happier while you breathe easier. A simple signal from a small unit in your home to your dog’s collar is all it takes. They learn their new yard boundaries quickly and comfortably, and the collar will remind them with a tone or static correction if they forget. Before you know it, it’s all happy playing and no random straying. Covering an area up to ½ acre, it’s portable, no buried wires, and sets up in 1-2 hours.
PIF-300:
Dog Size: 8 lbs and up (Neck 6-28”)
Collar: Waterproof & Batteries Incl.
Setup: 1-2 hours
Coverage: 1/2 acre
Correction Levels: 5 static, 1 beep
Additional Features:
Low Battery Indicator
The collar has a low battery indicator light which will flash 4-5 seconds when your battery is low. If this light is flashing, replace the battery.
Over Correction Protection
In the unlikely event that your pet “freezes” in the static correction zone, this feature limits the static correction duration to a maximum of 15 seconds.
Additional Information:
Transmitter:
Transmits the radio signal and is the center
of the Pet Area.
Pet Area:
Distance from the Transmitter where your pet
can roam freely.
Boundary Zone:
2 to 3 foot wide area outside the
Pet Area where your pet’s Receiver Collar will begin to
beep and then begin to deliver a Static Correction. The
correction will start in the Boundary Zone and continue
anywhere beyond the Pet Area. Note: The Receiver Collar is
equipped with a safety time-out feature that will stop correcting
after 30 seconds if your pet remains outside the Pet Area.
Receiver Collar:
Receives the radio signal from the
Transmitter.
Correction Level Button:
Adjusts the level of Static
Correction your pet receives outside the Pet Area.
Receiver Indicator Light:
Indicates the level of
correction at which the Receiver Collar is set. This light
also serves as a low battery indicator.
Contact Points:
Deliver the safe Static Correction when
your pet moves into the Boundary Zone.
Power Jack:
Where the Power Adapter plugs into the
Transmitter. The Transmitter is powered by a standard
120-volt outlet.
Boundary Switch:
Adjust according to the size of the Pet
Area desired.
Power Light:
Indicates when the Transmitter is on.
Boundary Control Dial: Adjusts the distance from the
Transmitter to the Boundary Zone. Note: Adjusting the dial
does not change the level of Static Correction on the Receiver
Collar.
